Single-Channel Supervisory ICs

Analog Devices Single-Channel Supervisory ICs are ultra-low-current, supervisory ICs that monitor the VCC voltage from 1.7V to 4.85V in approximately 50mV increments. The device asserts a reset when VCC voltage falls below the reset threshold. The reset output remains asserted for the reset timeout period after the VCC voltage rises above the factory-set VCC_TH + VHYS. The Analog Devices Single-Channel Supervisory ICs include a factory-programmable manual reset input (MR) that can be configured to assert a reset when it receives a rising-edge, falling-edge, active-low, or active-high input signal. The MAX16140 / MAX16144 / MAX16156 / MAX16157 feature an open-drain reset output, while the MAX16142 / MAX16146 / MAX16158 / MAX16159 feature a push-pull reset output.

結果: 4
選擇 圖像 零件編號
 製造商
說明 規格書 供貨情況 定價 (HKD) 基於數量按單價篩選表中結果。
數量 RoHS ECAD模型 類型
安裝風格
封裝/外殼
閥值電壓
監控的輸入數目
輸出類型
人工復位
監察定時器
備份電池開關
重置延時
電源電壓 - 最大值
最低工作溫度
最高工作溫度
準確性
系列
封裝
Analog Devices / Maxim Integrated 監控電路 300nA, Single Channel Supervisory in WLP
規格書

Voltage Supervisory SMD/SMT WLP-4 2.2 V 1 Input Active Low, Open Drain Manual Reset No Watchdog No Backup 100 ms 5.5 V - 40 C + 125 C 1.5 % MAX16140 Reel, Cut Tape, MouseReel
Analog Devices / Maxim Integrated 監控電路 300nA, Single Channel Supervisory in WLP
規格書
更多資訊可用

MAX16140 Reel
Analog Devices / Maxim Integrated 監控電路 300nA, Single Channel Supervisory in WLP
規格書

Voltage Supervisory SMD/SMT WLP-4 2.2 V 1 Input Active Low, Open Drain Manual Reset No Watchdog No Backup 10 ms 5.5 V - 40 C + 125 C 1.5 % MAX16140 Reel
Analog Devices / Maxim Integrated 監控電路 300nA, Single Channel Supervisory in WLP
規格書

Voltage Supervisory SMD/SMT WLP-4 1.8 V 1 Input Active Low, Push-Pull Manual Reset No Watchdog No Backup 10 ms 5.5 V - 40 C + 125 C 1.5 % MAX16140 Reel