Texas Instruments AWR1243BOOST Radar Sensor Evaluation Module (EVM)
Texas Instruments AWR1243BOOST Automotive Radar Sensor Evaluation Module (EVM) is an easy-to-use evaluation board for the AWR1243 high-performance mmWave front end. The evaluation platform enables the raw capture of ADC data from the front end for RF performance evaluation. A 5V 2.5A supply brick with a 2.1mm barrel plug (center positive) is not included with the Texas Instruments AWR1243BOOST. An external power supply is recommended to be purchased that complies with applicable regional safety standards.
Features
- Onboard antenna to enable field testing
- XDS110-based JTAG with a serial port interface for flash programming
- UART-to-USB interface for control, configuration, and data visualization
- TI Launchpad interface to seamlessly connect to TI MCUs
- Powers from a single 5V supply
Kit Contents
- Micro USB cable
- Mounting brackets with Bumpon™
- M3-size screws
- M3-size nuts
- Jumpers
Related Product
Texas Instruments mmWave感應器
單個晶片上實現無與倫比的精度、簡化感應和更小型的設計。
Texas Instruments AWR1243 76GHz to 81GHz mmWave Automotive MMIC
Ideal solution for low power, self-monitored, ultra-accurate radar systems in the automotive space.
Texas Instruments TCAN1042/Q1 Fault Protected CAN Transceivers
Designed to meet the ISO1189-2 High-Speed CAN (Controller Area Network) physical layer standard.
Texas Instruments TPS7A88 Low-Noise Low-Dropout Voltage Regulator
Flexibility of two LDOs and approximately 50% smaller solution size than two single-channel LDOs.
Texas Instruments LP8752x-Q1 Four-Phase 10A Buck Converters
Meets power management requirements for processors & platforms in automotive power applications.
Texas Instruments LM4040-N/-Q1 Micropower Shunt Voltage References
Ideal for space-critical applications, design effort reduced by several features.
發佈日期: 2018-05-16
| 更新日期: 2023-01-05