STMicroelectronics STM32MP157D-DK1 & STM32MP157F-DK2 Discovery Kits

STMicroelectronics STM32MP157A-DK1 and STM32MP157C-DK2 Discovery Kits provide a complete solution for the evaluation of the outstanding capabilities of the STM32MP1 Series Microprocessors. The STM32MP1 MPUs are based on the high-performance dual-core Arm® Cortex®-A7 32-bit RISC Core operating up to 800MHz. These energy-efficient application processors are designed to provide rich performance in high-end wearables and other low-power embedded and consumer applications.

The STM32MP157A-DK1 and STM32MP157C-DK2 Discovery Kits leverage the capabilities of STM32MP1 Series Microprocessors to allow users to easily develop applications using STM32 MPU OpenSTLinux Distribution Software for the main-processor and STM32CubeMP1 Software for the co-processor.

The Discovery Kits include an ST-LINK Embedded Debug Tool, LEDs, push-buttons, one Ethernet 1-Gbps connector, one USB Type-CTM OTG connector, four USB Type-A Host connectors, one HDMI transceiver, one stereo headset jack with analog microphone, and one microSD slot.

To expand the functionality of the STM32MP157A-DK1 and STM32MP157C-DK2 Discovery Kits, two GPIO expansion connectors are also available for ARDUINO® and Raspberry Pi® shields.

The STM32MP157F-DK2 Discovery Kit also features an LCD display with a touch panel and Wi-Fi® and BLUETOOTH® Low Energy (BLE) connectivity.

Features

STM32MP157 Arm-Based Dual Cortex-A7 32-bits + Cortex-M4 32-bits MPU in a TFBGA361 package
ST PMIC STPMIC1
4-Gbit DDR3L, 16-bits, 533MHz
1-Gbps Ethernet (RGMII) compliant with IEEE-802.3ab
USB OTG HS
Audio codec
4x user LEDs
2x user buttons
Reset button
Wake-up button
5V, 3A USB Type-C power supply input (not provided)
On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability, Virtual COM port, and debug port
STM32CubeMP1 and full mainline open-source Linux^® STM32 MPU OpenSTLinux Distribution software and examples
Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil^®, and GCC-based IDEs

Board connectors:
- Ethernet RJ45
- 4x USB Host Type-A
- USB Type-C DRP
- MIPI DSI
- HDMI
- Stereo headset jack including analog microphone input
- MicroSD card
- GPIO expansion connector (Raspberry Pi shields capability)
- ARDUINO Uno V3 expansion connectors
STM32MP157C-DK2 only
- 4" TFT LCD
  - 480 x 800 resolution with LED backlight
  - MIPI DSI interface
  - Capacitive touch panel
- Wi-Fi 802.11b/g/n
- Bluetooth Low Energy 4.1