Panduit SmartZone™ 1kVA to 3kVA Lithium Ion UPS

Panduit SmartZone™ 1kVA to 3kVA Lithium Ion UPS features a compact, high capacity, and long-life Lithium Ion battery. The uninterruptible power supplies are 1kVA to 3kVA single-phase devices available in two variants: a 120V Line-Interactive unit and a 230V unit with a pure Online Double Conversion system. These devices deliver highly efficient, reliable power protection and backup power for computer IT equipment. With excellent electrical performance, the units provide enhanced intelligent monitoring/network functions and comply with EMC/safety standards to meet the continually growing power demands of data centers and enterprise/edge IT equipment.

Features

Support rack/tower installation with rotatable colorful LCD display
Online double conversion with fully digital control provides stable and clean power with less ripple by filtering noise, automatic voltage regulation (AVR), and surge protection (EMEA unit only)
Wide input voltage range, applicable for severe situations such as large power grid fluctuation
- 110V_AC to 300V_AC Online models
- 75V_AC to 146V_AC Line Interactive models
Up to 96.5% efficiency for Online models and up to 97% for Line-interactive models, reducing the energy waste and the cost of electricity
High efficiency on Smart ECO mode for Online Double Conversion models
Output unity power factor means more active power for IT equipment load
Power factor correction topology on the input side dramatically reduces the total harmonic distortion (THD)
Intelligent battery management that offers optimal curve and temperature-compensation with advanced algorithms prolonging the battery life
EPO function (Emergency Power Off) allows quick and easy shut down of the UPS when an emergency event occurs

Wide input frequency and voltage supports generator connection, ensuring the uninterruptible operation
Hot-swappable battery design
Cold start function
Intelligent fan speed regulation, automatic adjustment of fan speed due to the ambient temperature and load percentage
Programmable outlet group
Segmented colorful LCD
Multiple communication interfaces
Short-circuit, overload, overheat, battery overcharge/over-discharge, output low voltage, fan fault alarm, and RJ45 surge protection
Intelligent Network Management Card (included with N Models)
SmartZone™ Cloud Ready (included with N Models
SmartZone™ mPower management software
RoHS and REACH, CE/UL/ENERGY STAR® 2.0 compliant for North American units

Applications

Data centers
Enterprise equipment
Edge IT equipment

Specifications

Output
- 1000VA to 3000VA output power capacity ranges
- 900W to 3000W maximum configurable power range
- nominal output voltage
  - 230V_AC, 220V_AC/240V_AC selectable for Online models
  - 1200VAC, 220VAC/240VAC selectable for Line Interactive models
- <3% linear load output voltage distortion, <5% non-linear load
- Output frequencies
  - 50/60Hz, ±4Hz in Online mode, and ±0.1Hz in Battery mode for Online models
  - Line mode is synchronized with the input, 50/60Hz ±0.1Hz in Battery mode for Line Interactive models
- Output power factor
  - 1.0 for Online models
  - 0.9 for Line Interactive models
- 3:1 load crest factor
- 87.5% to 97.0% efficiency range
0 to +40°C operating temperature range, no derating
IP20 protection
5-year warranty (UPS and Battery)

Input
- nominal input voltage
  - 230V_AC, 220V_AC/240V_AC selectable for Online models
  - 100V_AC to 1225V_AC for Line Interactive models
- Input voltage ranges
  - 176V_AC to 264V_AC at full load for all models
  - 110V_AC to 300V_AC at half load
- Input frequency ranges
  - 40Hz to 70Hz, auto-sensing for Online models
  - 50/60Hz, auto-sensing for Line Interactive models
- Cord length options
  - 1.8m (6ft) for Online models
  - 3m (10ft) for Line Interactive models
Battery
- 3hrs to 4hrs typical recharge time
- Battery voltages
  - 25.6V_DC (U01x) and 76.8V_DC (U02x/U03x) for Online models
  - 25.6V_DC (U01x), 48V_DC (U02x), and 76.8V_DC (U03x) for Line Interactive models
- 2A maximum charging current