Omron Electronics D2EW Sealed Ultra-Subminiature Basic Switches

Omron Electronics D2EW Sealed Ultra-Subminiature Basic Switches include four variants with normally open (blue collar) or normally closed (red collar) operation and solder or press-fit terminals. These switches are sealed to IP67 against ingress into the interior from all directions and have an 8.3mm x 5.3mm x 7mm package size. Omron Electronics D2EW Sealed Ultra-Subminiature Basic Switches include UL-approved models, along with molded lead wire options and PCB and short press-fit terminal options. These ultra-small sealed switches eliminate the need for a lever, and the pin plunger shape supports operation from a wide angle between the vertical and the horizontal. This reduces the effect of play in the cam position and improves operating position tolerance. A left-right asymmetric post shape reduces the risk of incorrect assembly. Omron Electronics D2EW Sealed Ultra-Subminiature Basic Switches contribute to energy savings with a minimum applicable load of 50μA.

Features

Supports multi-angle operation without using lever for increased flexibility
8.3mm x 7mm x 5.3mm package size
Left-right asymmetrical post shape prevents misassembly
Contributes to energy saving (minimum applicable load 50μA)
IP67 protection for wet or dusty environments
Sliding contact structure delivers quiet operation
UL approved models

Molded lead wire options
PCB and short press-fit terminal options
Sliding gold-plated contacts can be used down to 50μA (5V), and up to 12V and 100mA with resistive loads (tested at +20°C, 65% RH)
30mm to 500mm/s operating speed
>300,000 electrical and mechanical operations
-40°C to +85°C operating temperature range, up to 95% relative humidity