返回至模組配件

Trenz Electronic TEB1000 SoM Baseboard

Trenz Electronic TEB1000 System-on-Module (SOM) is designed and developed for the use of TEI1000 Altera® Stratix® 10 SoM. This baseboard is powered by a 12V power supply and features three fixed clock generators. The TEB1000 baseboard includes 2 x 2Kb EEPROM with EUI-48 identity (MAC), 5 x LEDs, 4-bit user DIP switch, and 2 x user push buttons. This baseboard consists of 2 x Gigabit Ethernet RJ45 connectors, a USB 2.0 micro A/B connector, and an SD card slot with a level translator.

Features

  • PCIe full-length form factor
  • TEI1000 Altera® Stratix® 10 SoM supported SoM
  • 3 x Samtec ADF6 240pin module connectors B2B connectors
  • I/O resources:
    • PCIe 8 lanes (GBT)
    • ANSI/VITA 57.4 compliant FMC+:
      • 4 x transceivers (GBT)
      • 116 x IO (LA + HA banks)
      • Clock, trigger, JTAG, and control signals
    • SFP+ connector (GBT)
    • CRUVI extension interface
      • 1 x high speed CRUVI B2B connector
      • 1 x low speed CRUVI B2B connector
    • 2 x Gigabit Ethernet RJ45 connector
    • USB 2.0 micro A/B connector
    • SD card slot with level translator
  • 3 x fixed clock generators
  • On-board periphery:
    • 2 x 2Kb EEPROM with EUI-48 identity (MAC)
    • 5 x LEDs (1 x red and 4 x green)
    • 4-bit user DIP switch 
    • 2 x user push buttons
    • Reset push button
    • FMC cooling fan
  • MAX® 10 system controller
  • 12V (8-pin graphic card connector only) power supply
發佈日期: 2025-11-03 | 更新日期: 2025-11-13