Sensor Fixings & Accessories MULTI-BEAM: 3/4-Wire Scanner Block - Retro; Range: 2.5cm-22 m; Input: depends on power block; Output: depends on the power block; Interconnecting Pins
SBL1
Banner Engineering
1:
HK$2,671.83
10 In Stock
Mouser Part No
778-SBL1
Banner Engineering
Sensor Fixings & Accessories MULTI-BEAM: 3/4-Wire Scanner Block - Retro; Range: 2.5cm-22 m; Input: depends on power block; Output: depends on the power block; Interconnecting Pins
10 In Stock
Buy
Min.: 1
Mult.: 1
Sensor Fixings & Accessories Reflective Tape; 3 x 600 in; Max Temp = 60 degree C; 50 ft Long
BRT-THG-3-600
Banner Engineering
1:
HK$6,813.72
4 In Stock
Mouser Part No
778-BRT-THG-3-600
Banner Engineering
Sensor Fixings & Accessories Reflective Tape; 3 x 600 in; Max Temp = 60 degree C; 50 ft Long
4 In Stock
Buy
Min.: 1
Mult.: 1
Retroreflective Tapes
Sensor Fixings & Accessories Accessory: 900 mm Elevated-Use Stand-Off Pipe (1/2 in NPSM/DN15); Material: Anodized Aluminum (BLACK); 1/2 NPT Thread At Both Ends; Compatible With Most Industrial Environments
SOP-E12-900A
Banner Engineering
1:
HK$419.06
30 In Stock
Mouser Part No
778-SOP-E12-900A
Banner Engineering
Sensor Fixings & Accessories Accessory: 900 mm Elevated-Use Stand-Off Pipe (1/2 in NPSM/DN15); Material: Anodized Aluminum (BLACK); 1/2 NPT Thread At Both Ends; Compatible With Most Industrial Environments
30 In Stock
Buy
Min.: 1
Mult.: 1
Sensor Fixings & Accessories MULTI-BEAM: 3/4-Wire Scanner Block - Convergent; Focal Point: 38 mm; Input: depends on power block; Output: depends on power block; Interconnecting Pins
SBC1
Banner Engineering
1:
HK$3,556.96
4 In Stock
Mouser Part No
778-SBC1
Banner Engineering
Sensor Fixings & Accessories MULTI-BEAM: 3/4-Wire Scanner Block - Convergent; Focal Point: 38 mm; Input: depends on power block; Output: depends on power block; Interconnecting Pins
4 In Stock
Buy
Min.: 1
Mult.: 1
Sensor Fixings & Accessories EZAC Interface IP65 metal box; Rec/Emt hookup; Power: Input: 100-230 V ac; Output: +24 V dc at 0.7 A; Output: 2NO/1NC; Rating: 5-300 mA at 60 V, 0.25-8 A at 250 V; 8-pin M12, Hard-wired
360°
+10 images
EZAC-R11-QE8
Banner Engineering
1:
HK$6,775.01
3 In Stock
Mouser Part No
778-EZAC-R11-QE8
Banner Engineering
Sensor Fixings & Accessories EZAC Interface IP65 metal box; Rec/Emt hookup; Power: Input: 100-230 V ac; Output: +24 V dc at 0.7 A; Output: 2NO/1NC; Rating: 5-300 mA at 60 V, 0.25-8 A at 250 V; 8-pin M12, Hard-wired
3 In Stock
Buy
Min.: 1
Mult.: 1
Sensor Fixings & Accessories L1 A3 FULLY ASSY MULTIBEAM
L1A3
Banner Engineering
1:
HK$6,470.78
2 In Stock
Mouser Part No
778-L1A3
Banner Engineering
Sensor Fixings & Accessories L1 A3 FULLY ASSY MULTIBEAM
2 In Stock
Buy
Min.: 1
Mult.: 1
Sensor Fixings & Accessories Bracket: for DX80 or Q45 to K50U-RA
360°
+3 images
BWA-BK-004
Banner Engineering
1:
HK$345.24
9 In Stock
Mouser Part No
778-BWA-BK-004
Banner Engineering
Sensor Fixings & Accessories Bracket: for DX80 or Q45 to K50U-RA
9 In Stock
Buy
Min.: 1
Mult.: 1
Sensor Fixings & Accessories Bracket: For Use with HLS27; Impact Absorbing; Set of Two Brackets; 300 Series Stainless Steel; Designed for M5 or No. 10 Mounting Hardware
LMBHLS27S
Banner Engineering
1:
HK$164.40
2 In Stock
Mouser Part No
778-LMBHLS27S
Banner Engineering
Sensor Fixings & Accessories Bracket: For Use with HLS27; Impact Absorbing; Set of Two Brackets; 300 Series Stainless Steel; Designed for M5 or No. 10 Mounting Hardware
2 In Stock
Buy
Min.: 1
Mult.: 1
Sensor Fixings & Accessories Stands for Mirrors & Sensors; Brackets Outward: Length 100-600 mm (4-24 in); Stand Height: 1050 mm (42 in); Includes: Base Pole and Hardware for attachment
MSA-S42-1
Banner Engineering
1:
HK$6,077.37
1 In Stock
Mouser Part No
778-MSA-S42-1
Banner Engineering
Sensor Fixings & Accessories Stands for Mirrors & Sensors; Brackets Outward: Length 100-600 mm (4-24 in); Stand Height: 1050 mm (42 in); Includes: Base Pole and Hardware for attachment
1 In Stock
Buy
Min.: 1
Mult.: 1
Hardware
optical Safety System Sensors or Corner Mirrors
Sensor Fixings & Accessories OPTO-TOUCH: Green Field Cover; Prevents unwanted activation of OPTO-TOUCH button; Material: Polypropylene Copolymer; Capable of absorbing high impacts
OTC-1-GN
Banner Engineering
1:
HK$180.84
1 In Stock
Mouser Part No
778-OTC-1-GN
Banner Engineering
Sensor Fixings & Accessories OPTO-TOUCH: Green Field Cover; Prevents unwanted activation of OPTO-TOUCH button; Material: Polypropylene Copolymer; Capable of absorbing high impacts
1 In Stock
Buy
Min.: 1
Mult.: 1
Sensor Fixings & Accessories MAXI-BEAM: Power Block; Range: Depends on Sensor; Input: 12-30 V dc-12-250 V ac; Output: SPDT Electromechanical Relay; Wiring Chamber
RPBR2
Banner Engineering
1:
HK$1,570.02
3 In Stock
Mouser Part No
778-RPBR2
Banner Engineering
Sensor Fixings & Accessories MAXI-BEAM: Power Block; Range: Depends on Sensor; Input: 12-30 V dc-12-250 V ac; Output: SPDT Electromechanical Relay; Wiring Chamber
3 In Stock
Buy
Min.: 1
Mult.: 1
Sensor Fixings & Accessories MULTI-BEAM: 3/4-Wire Scanner Block - Emitter; Range: 30 m; Input: depends on power block; Output: depends on power block; Interconnecting Pins
SBEV
Banner Engineering
1:
HK$2,334.73
5 In Stock
Mouser Part No
778-SBEV
Banner Engineering
Sensor Fixings & Accessories MULTI-BEAM: 3/4-Wire Scanner Block - Emitter; Range: 30 m; Input: depends on power block; Output: depends on power block; Interconnecting Pins
5 In Stock
Buy
Min.: 1
Mult.: 1
Sensor Fixings & Accessories Bracket: One-piece bracket for mounting to 28 mm diamiter pipe; Black-painted steel; Requires SMBPVA..C for mounting at an angle +/- 90 deg
SMBPVA7
Banner Engineering
1:
HK$411.00
5 In Stock
Mouser Part No
778-SMBPVA7
Banner Engineering
Sensor Fixings & Accessories Bracket: One-piece bracket for mounting to 28 mm diamiter pipe; Black-painted steel; Requires SMBPVA..C for mounting at an angle +/- 90 deg
5 In Stock
Buy
Min.: 1
Mult.: 1
Sensor Fixings & Accessories Bracket kit for sensor array bar; Material: 12 Gauge cold rolled steel; #8-32 /M4 mounting holes located under array bar; M3 hardware to attach to array end cap included
SMBSAB-IN
Banner Engineering
1:
HK$115.08
2 In Stock
Mouser Part No
778-SMBSAB-IN
Banner Engineering
Sensor Fixings & Accessories Bracket kit for sensor array bar; Material: 12 Gauge cold rolled steel; #8-32 /M4 mounting holes located under array bar; M3 hardware to attach to array end cap included
2 In Stock
Buy
Min.: 1
Mult.: 1
Sensor Fixings & Accessories Bracket: Right-Angle, Low Profile; Fits M22 Base; 12 Gauge 300 Series Stainless Steel (No Hardware)
LMB22LP
Banner Engineering
1:
HK$123.30
1 In Stock
Mouser Part No
778-LMB22LP
Banner Engineering
Sensor Fixings & Accessories Bracket: Right-Angle, Low Profile; Fits M22 Base; 12 Gauge 300 Series Stainless Steel (No Hardware)
1 In Stock
Buy
Min.: 1
Mult.: 1
Sensor Fixings & Accessories MULTI-BEAM: 3/4-Wire Scanner Block - Emitter; Range: 45 m; Input: depends on power block; Output: depends on power block; Interconnecting Pins
SBE
Banner Engineering
1:
HK$2,038.56
1 In Stock
Mouser Part No
778-SBE
Banner Engineering
Sensor Fixings & Accessories MULTI-BEAM: 3/4-Wire Scanner Block - Emitter; Range: 45 m; Input: depends on power block; Output: depends on power block; Interconnecting Pins
1 In Stock
Buy
Min.: 1
Mult.: 1
Sensor Fixings & Accessories SMBPVD100 AB NO DIP ACCESS BKT PROTECTIVE BRACKET PVD100
SMBPVD100AB
Banner Engineering
1:
HK$374.67
4 In Stock
Mouser Part No
778-SMBPVD100AB
Banner Engineering
Sensor Fixings & Accessories SMBPVD100 AB NO DIP ACCESS BKT PROTECTIVE BRACKET PVD100
4 In Stock
Buy
Min.: 1
Mult.: 1
Sensor Fixings & Accessories MPC3 A PC Amplifier Special used with SP100FF
Banner Engineering MPC3A
MPC3A
Banner Engineering
1:
HK$1,364.52
14 In Stock
Mouser Part No
778-MPC3A
Banner Engineering
Sensor Fixings & Accessories MPC3 A PC Amplifier Special used with SP100FF
14 In Stock
Buy
Min.: 1
Mult.: 1
Sensor Fixings & Accessories Glass Lens: Aluminum Housing; Accepts M8 X 1.25 Thread. Long Range or Retroreflective Sensing
360°
+3 images
L9M8
Banner Engineering
1:
HK$402.78
5 In Stock
Mouser Part No
778-L9M8
Banner Engineering
Sensor Fixings & Accessories Glass Lens: Aluminum Housing; Accepts M8 X 1.25 Thread. Long Range or Retroreflective Sensing
5 In Stock
Buy
Min.: 1
Mult.: 1
Sensor Fixings & Accessories Bracket: For Use with HLS27; Impact Absorbing Clamp; Set of Two Brackets; 300 Series Stainless Steel; M5 Stainless Steel Hardware Included for Securing Bracket to LED light
LMBHLS27O
Banner Engineering
1:
HK$164.40
6 In Stock
Mouser Part No
778-LMBHLS27O
Banner Engineering
Sensor Fixings & Accessories Bracket: For Use with HLS27; Impact Absorbing Clamp; Set of Two Brackets; 300 Series Stainless Steel; M5 Stainless Steel Hardware Included for Securing Bracket to LED light
6 In Stock
Buy
Min.: 1
Mult.: 1
Sensor Fixings & Accessories Accessory: Weather Cover Q130; Weather Cover Q130; Polycarbonate; Hydrophobic Coating
Q130WS
Banner Engineering
1:
HK$920.64
1 In Stock
Mouser Part No
778-Q130WS
Banner Engineering
Sensor Fixings & Accessories Accessory: Weather Cover Q130; Weather Cover Q130; Polycarbonate; Hydrophobic Coating
1 In Stock
Buy
Min.: 1
Mult.: 1
Covers
Q130
Sensor Fixings & Accessories QT50RCK COVER KIT R-GAGE INCLEMENT WEATHER
360°
+4 images
QT50RCK
Banner Engineering
1:
HK$1,093.67
3 In Stock
Mouser Part No
778-QT50RCK
Banner Engineering
Sensor Fixings & Accessories QT50RCK COVER KIT R-GAGE INCLEMENT WEATHER
3 In Stock
Buy
Min.: 1
Mult.: 1
Covers
R-GAGE
Sensor Fixings & Accessories Bracket: Adjustable and Mounting Block; Includes: 2 mm hex key; Includes: 3/64 in hex wrench and 4 set screws
SMB46X3
Banner Engineering
1:
HK$1,384.08
3 In Stock
Mouser Part No
778-SMB46X3
Banner Engineering
Sensor Fixings & Accessories Bracket: Adjustable and Mounting Block; Includes: 2 mm hex key; Includes: 3/64 in hex wrench and 4 set screws
3 In Stock
Buy
Min.: 1
Mult.: 1
Sensor Fixings & Accessories SMBFP6 MOUNTING BRACKET
SMBFP6
Banner Engineering
1:
HK$189.06
1 In Stock
Mouser Part No
778-SMBFP6
Banner Engineering
Sensor Fixings & Accessories SMBFP6 MOUNTING BRACKET
1 In Stock
Buy
Min.: 1
Mult.: 1
Sensor Fixings & Accessories Bracket: Pair of 2-piece swivel brackets; Mount directly to sensor or to PVD/PVA protective brackets; Designed for mounting sensor to look down or at an angle +/-90 degree
SMBPVA9
Banner Engineering
1:
HK$657.52
1 In Stock
Mouser Part No
778-SMBPVA9
Banner Engineering
Sensor Fixings & Accessories Bracket: Pair of 2-piece swivel brackets; Mount directly to sensor or to PVD/PVA protective brackets; Designed for mounting sensor to look down or at an angle +/-90 degree
1 In Stock
Buy
Min.: 1
Mult.: 1
Brackets
PVA Mounting Sensor