ADL8154 Low Phase Noise Amplifier

Analog Devices ADL8154 Low Phase Noise Amplifier is a small form factor designed for instrumentation, radar, and telecommunications applications. The phase noise from 2GHz to 5GHz is -172dBc/Hz at 1dB compression (P1dB) and 10kHz offset. The ADL8154 operates from a single positive supply (VCC); its bias current (ICQ) is set by a resistor connected between the RBIAS pin and the VCC1 and VCC2 pins. The RF input and RF output are DC-coupled and matched to 50Ω. A bias inductor is required on the RF output.

結果: 2
選擇 圖像 零件編號
 製造商
說明 規格書 供貨情況 定價 (HKD) 基於數量按單價篩選表中結果。
數量 RoHS ECAD模型 操作頻率
工作電源電壓
運作供電電流
增益
NF - 雜訊圖標
類型
安裝風格
封裝/外殼
P1dB - 壓縮點
OIP3 - 三階交調
最低工作溫度
最高工作溫度
系列
封裝
Analog Devices RF放大器 DC-6GHz Low Phase Noise Amp
規格書

10 MHz to 6 GHz 4 V to 5.5 V 125 mA 18 dB 4 dB Low Noise Amplifiers SMD/SMT LFCSP-8 21 dBm 38.5 dBm - 55 C + 125 C ADL8154 Cut Tape
Analog Devices RF放大器 DC-6GHz Low Phase Noise Amp
規格書

10 MHz to 6 GHz 4 V to 5.5 V 125 mA 18 dB 4 dB Low Noise Amplifiers SMD/SMT LFCSP-8 21 dBm 38.5 dBm - 55 C + 125 C ADL8154 Reel