ISOM8610DFGR

Texas Instruments
595-ISOM8610DFGR
ISOM8610DFGR

製造商:

說明:
固態繼電器 - PCB安裝 DC input normally o pen output single-c

壽命週期:
新產品:
該製造商的新產品。
ECAD模型:
下載免費的庫載入器,為ECAD工具轉換此文件。瞭解更多關於 ECAD 型號的資訊。

庫存量: 19,892

庫存:
19,892 可立即送貨
工廠前置作業時間:
12 週 工廠預計生產時間數量大於所顯示的數量。
最少: 1   多個: 1
單價:
HK$-.--
總價:
HK$-.--
估計關稅:
包裝:
完整捲(訂購多個2000)

Pricing (HKD)

數量 單價
總價
零卷 / MouseReel™
HK$11.84 HK$11.84
HK$10.69 HK$106.90
HK$10.03 HK$250.75
HK$9.70 HK$485.00
HK$9.37 HK$937.00
HK$8.96 HK$2,240.00
HK$8.63 HK$4,315.00
HK$8.38 HK$8,380.00
完整捲(訂購多個2000)
HK$8.38 HK$16,760.00
HK$7.73 HK$30,920.00
† HK$55.00 MouseReel™費用將加入您的購物車內並自動計算。所有MouseReel™訂單均不能取消和不能退換。

商品屬性 屬性值 選擇屬性
Texas Instruments
產品類型: 固態繼電器 - PCB安裝
RoHS:  
Reel
Cut Tape
MouseReel
PCB Mount
150 mA
80 VDC
1 Form A (SPST-NO)
850 mV to 1.55 V
SOIC-5
MOSFET
20 mA
- 55 C
+ 125 C
7 mm (0.276 in)
3.51 mm (0.138 in)
2.4 mm (0.094 in)
ISOM8610
品牌: Texas Instruments
絕緣電壓: 3750 Vrms
濕度敏感: Yes
Pd - 功率消耗 : 200 mW
產品類型: SSR - Solid State Relays
原廠包裝數量: 2000
子類別: Relays
找到產品:
若要顯示類似商品,請選取至少一個核選方塊
至少選中以上一個核取方塊以顯示在此類別中類似的產品。
所選屬性: 0

此功能需要啟用JavaScript。

CNHTS:
8542399000
USHTS:
8542390090
MXHTS:
8542399999
ECCN:
EAR99

ISOM8610 Opto-Emulator Switch

Texas Instruments ISOM8610 Opto-Emulator Switch is an 80V single-pole, normally open switch with an opto-emulator input. This opto-emulator switch inputs control the back-to-back MOSFETs without a power supply on the secondary side. The ISOM8610 opto-emulator switch offers drop-in replacement and pin-to-pin upgrade to industry-standard photorelays. This switch features 800μA ultra-low input trigger current, 70V ultra-low off-state leakage, and a primary-side current-controlled switch. The ISOM8610 opto-emulator switch comes in a small SO-4 package with a 3.75kVRMS isolation rating. This switch operates at -55°C to 125°C temperature range. Typical applications include building automation, factory automation and control, test and measurement, and appliances.

ISOM8610DFGEVM Opto-Emulator Evaluation Module

Texas Instruments ISOM8610DFGEVM Opto-Emulator Evaluation Module (EVM) supports the evaluation of the ISOM8610, a single-channel opto-emulator with integrated FET in a four-pin DFG SOIC package. The Texas Instruments ISOM8610DFGEVM helps designers evaluate the device performance for fast development and analysis of an isolated system.