NCP51105ASNT1G

onsemi
863-NCP51105ASNT1G
NCP51105ASNT1G

製造商:

說明:
閘極驅動器 ORDERABLE PART FOR NCP51105A

ECAD模型:
下載免費的庫載入器,為ECAD工具轉換此文件。瞭解更多關於 ECAD 型號的資訊。

商品屬性 屬性值 選擇屬性
onsemi
產品類型: 閘極驅動器
RoHS:  
Gate Drivers
Single
SMD/SMT
TSOP-6
1 Driver
1 Output
12.7 V
25 V
5 ns
5 ns
- 40 C
+ 125 C
NCP51105A
Reel
Cut Tape
品牌: onsemi
輸入電壓(最大值): 25 V
輸入電壓(最小值): 12.7 V
邏輯類型: CMOS, TTL
運作供電電流: 700 uA
Pd - 功率消耗 : 500 mW
產品類型: Gate Drivers
原廠包裝數量: 3000
子類別: PMIC - Power Management ICs
找到產品:
若要顯示類似商品,請選取至少一個核選方塊
至少選中以上一個核取方塊以顯示在此類別中類似的產品。
所選屬性: 0

合規守則
USHTS:
8542390090
ECCN:
EAR99
原產地分類
原產國:
馬來西亞
封裝原產國:
馬來西亞
擴散國:
美國
出貨時,國家可能會有所變更。

NCP51105 Single 2.6A Low-Side Gate Driver

onsemi NCP51105 Single 2.6A Low-Side Gate Driver is a high-current driver designed to drive power MOSFETs and IGBTs. The logic input is compatible with CMOS and TTL output. The NCP51105 features an OCP pin that provides over-current protection with negative voltage detected across a switching current sensing resistor and an EN pin that can report faults status to an external controller such as an MCU. The EN pin must be pulled up to a higher voltage than the threshold for normal operation and pulled down to disable output in all fault conditions. Internal VDD circuitry provides an under-voltage lockout function by holding the output low until the supply voltage is recovered into the operating range, and the fault recovery time can be programmable by a time-constant set of resistance and capacitance connected to the EN pin.

庫存量: 2,942

庫存:
2,942 可立即送貨
工廠前置作業時間:
28 週 工廠預計生產時間數量大於所顯示的數量。
最少: 1   多個: 1
單價:
HK$-.--
總價:
HK$-.--
估計關稅:

Pricing (HKD)

數量 單價
總價
HK$7.97 HK$7.97
HK$5.70 HK$57.00
HK$5.14 HK$128.50
HK$4.52 HK$452.00
HK$4.23 HK$1,057.50
HK$4.05 HK$2,025.00
HK$3.93 HK$3,930.00
完整捲(訂購多個3000)
HK$3.61 HK$10,830.00
HK$3.53 HK$21,180.00