PCA9952TW/Q900,118

NXP Semiconductors
771-PCA9952TWQ900118
PCA9952TW/Q900,118

製造商:

說明:
LED照明驅動器IC 16-channel Fm+ I2C- bus 57 mA LED driver

ECAD模型:
下載免費的庫載入器,為ECAD工具轉換此文件。瞭解更多關於 ECAD 型號的資訊。

庫存量: 6,567

庫存:
6,567 可立即送貨
工廠前置作業時間:
16 週 工廠預計生產時間數量大於所顯示的數量。
最少: 1   多個: 1
單價:
HK$-.--
總價:
HK$-.--
估計關稅:
包裝:
完整捲(訂購多個2500)

Pricing (HKD)

數量 單價
總價
零卷 / MouseReel™
HK$36.74 HK$36.74
HK$27.87 HK$278.70
HK$25.65 HK$641.25
HK$23.18 HK$2,318.00
HK$22.03 HK$5,507.50
HK$21.04 HK$10,520.00
HK$19.73 HK$19,730.00
完整捲(訂購多個2500)
HK$19.07 HK$47,675.00
HK$17.67 HK$88,350.00
† HK$55.00 MouseReel™費用將加入您的購物車內並自動計算。所有MouseReel™訂單均不能取消和不能退換。

商品屬性 屬性值 選擇屬性
NXP
產品類型: LED照明驅動器IC
RoHS:  
16 Output
Boost
57 mA
HTSSOP-28
5.5 V
3 V
1 MHz
40 V
PCA9952
- 40 C
+ 85 C
I2C Control
AEC-Q100
Reel
Cut Tape
MouseReel
品牌: NXP Semiconductors
輸入電壓: 3 V to 5.5 V
安裝風格: SMD/SMT
通道數: 16 Channel
Pd - 功率消耗 : 3.2 W
產品: LED Drivers
產品類型: LED Lighting Drivers
原廠包裝數量: 2500
子類別: Driver ICs
電源電流 - 最大值: 16 mA
零件號別名: 935298949118
每件重量: 103.651 mg
找到產品:
若要顯示類似商品,請選取至少一個核選方塊
至少選中以上一個核取方塊以顯示在此類別中類似的產品。
所選屬性: 0

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
8541400103
TARIC:
8541401000
MXHTS:
8542399999
BRHTS:
85414011
ECCN:
EAR99

PCA9952 16-channel Constant Current LED Driver

NXP Semiconductors PCA9952 16-channel Constant Current LED Driver is an I2C-bus controlled device optimized for dimming and blinking 57mA Red/Green/Blue/Amber (RGBA) LEDs for amusement products. Each LEDn output provides its own 8-bit resolution (256 steps) fixed frequency individual PWM controller operating at 31.25kHz with an adjustable duty cycle from 0% to 99.6%. This allows the LED to be set to a specific brightness value. An additional 8-bit resolution (256 steps) group PWM controller offers both a fixed frequency of 122 Hz and an adjustable frequency between 15 Hz to once every 16.8 seconds with a duty cycle that is adjustable from 0% to 99.6% that is used to either dim or blink all LEDs with the same value.

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.