FPF2595UCX

onsemi
512-FPF2595UCX
FPF2595UCX

製造商：

說明：
電源開關IC - 配電 Load Switch w/ Adj Current Limit Cntrl

規格書:
ECAD模型:
下載免費的庫載入器，為ECAD工具轉換此文件。瞭解更多關於 ECAD 型號的資訊。
更多資訊
瞭解更多關於onsemi FPF2595UCX的資訊

庫存量: 12,508

庫存：
12,508 可立即送貨
工廠前置作業時間：
26 週 工廠預計生產時間數量大於所顯示的數量。
最少： 1   多個： 1
單價:
HK$-.--
總價:
HK$-.--
估計關稅:
包裝:
完整捲（訂購多個3000）

Pricing (HKD)

數量 單價
總價
零卷 / MouseReel™ †
HK$8.88 HK$8.88
HK$6.43 HK$64.30
HK$5.80 HK$145.00
HK$5.13 HK$513.00
HK$4.80 HK$1,200.00
HK$4.60 HK$2,300.00
HK$4.24 HK$4,240.00
完整捲（訂購多個3000）
HK$4.13 HK$12,390.00
HK$4.07 HK$24,420.00
† HK$55.00 MouseReel™費用將加入您的購物車內並自動計算。所有MouseReel™訂單均不能取消和不能退換。 ↩

商品屬性 屬性值 選擇屬性
onsemi
產品類型: 電源開關IC - 配電
RoHS:  
Load Switch
1 Output
3.9 A
1 A
50 mOhms
1.46 ms
230 us
2.5 V to 5.5 V
- 40 C
+ 85 C
SMD/SMT
WLCSP-12
FPF2595
Reel
Cut Tape
MouseReel
品牌: onsemi
Pd - 功率消耗 : 1.48 W
產品: Load Switches
產品類型: Power Switch ICs - Power Distribution
原廠包裝數量: 3000
子類別: Switch ICs
電源電壓 - 最大值: 5.5 V
電源電壓 - 最小值: 2.5 V
每件重量: 74 g
找到產品:
若要顯示類似商品，請選取至少一個核選方塊
至少選中以上一個核取方塊以顯示在此類別中類似的產品。
所選屬性: 0

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390070
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

USB Type-C™產品組合

USB Type-C 除了取代舊版的USB標準，同時也取代Thunderbolt和DisplayPort等其他標準，為設計人員和製造商帶來高效能與設計方便性。onsemi專門提供各種高品質的產品，能整合到適用於USB電源供應的本解決方案內。請參閱方塊圖，以檢視下列精選的USB Type-C解決方案。

FPF2595 IntelliMAX™ Load Switch

onsemi FPF2595 IntelliMAX™ Overvoltage, Overcurrent Protection Load Switch is an advanced load-management switch for applications requiring a highly integrated solution. The FPF2595 disconnects load powered from the <6VDC power rail with stringent off-state current targets and high load capacitances (<100uF). The FPF2595 features a slew-rate controlled low-impedance MOSFET switch (35mΩ typical) and integrated analog features. The slew-rate controlled turn-on feature prevents inrush current and the resulting excessive voltage droop on power rails. onsemi FPF2595 also offers over-voltage protection and over-temperature protection. FPF2595's true reverse-current blocking (TRCB) function obstructs unwanted reverse current from VOUT to VIN during ON and OFF states. The device's extremely low off-state current drain of <2µA maximum facilitates compliance with standby power requirements. A logic input (active HIGH), capable of interfacing directly with low-voltage control signal / general-purpose input/output (GPIO) without an external pull-down resistor, manages switch control. With an input voltage range of 2.5VDC to 5.5VDC, FPF2595 supports a large range of consumer, medical, optical, portable, storage, and industrial-device power management applications.

Protection & Small Signal Discretes

onsemi Protection & Small Signal Discretes are a portfolio of over 8000 discretes available in 176 packages. The portfolio features high performance small signal Schottky in the industry's smallest form factor. Standard & automotive small signal products are available.

IntelliMAX™ Advanced Load Management Switches

onsemi IntelliMAX™ Advanced Load Management Switches help designers increase system protection and reduce complexity in designs while achieving greater system power and reliability. The FPF1039 series demonstrates low shutdown current drain to help facilitate compliance in low-standby power applications. The FPF1320 and FPF1321 switches perform seamless power-source transitions between two input power rails using the SEL pin with the advanced break-before-make operation. onsemi IntelliMAX Advanced Load Management Switches are ideal for smart devices and portable storage devices that require a high current capability and low ON-resistance solution for power path management.

FPF2x Over Current Protected Switches

onsemi FPF2x Over-Current Protected Switches prevent excessive current and trigger one of three fault conditions. Auto restart will automatically shut down the part and attempt to restart at the defined "auto restart time" interval until the fault is cleared. The Shutdown feature automatically shuts down the part and requires a power cycle on the "ON" pin to clear the fault. The Constant Current feature limits the current to a fixed or user-defined value.

發生意外的錯誤。


有問題嗎？ 請瀏覽幫助中心。
有關特定訂單的問題，請登入您的帳戶。

如有其他問題，請致電800-346-6873或發送郵件至 help@mouser.com 與我們聯絡。