TPS92360DCKR

Name: Texas Instruments TPS92360DCKR
Brand: Texas Instruments
SKU: 595-TPS92360DCKR
Price: 7.32 HKD
Availability: InStock

影像僅供參考
請參閱產品規格

Mouser 編號：

595-TPS92360DCKR

製造商編號：

TPS92360DCKR

製造商：

Texas Instruments

說明：

LED照明驅動器IC 38-V 1.2-A single ch annel LED backlight

規格書:

TPS92360DCKR 規格書

ECAD模型:

下載免費的庫載入器，為ECAD工具轉換此文件。瞭解更多關於 ECAD 型號的資訊。

更多資訊

瞭解更多關於Texas Instruments TPS92360DCKR的資訊

庫存量: 1,982

庫存：: 1,982

可立即送貨

發生意外錯誤了。請稍後再試。
在途量:: 3,000

預期4/3/2026
工廠前置作業時間：: 12

週工廠預計生產時間數量大於所顯示的數量。

輸入數量：

最少： 1 多個： 1

單價:

HK$-.--

總價:

HK$-.--

估計關稅:

包裝:

完整捲（訂購多個3000）

帶狀裁切

MouseReel™ (+HK$55.00)

Pricing (HKD)

數量	單價	總價
零卷 / MouseReel™ ^†
	HK$7.32	HK$7.32
	HK$5.24	HK$52.40
	HK$4.72	HK$118.00
	HK$4.15	HK$415.00
	HK$3.87	HK$967.50
	HK$3.71	HK$1,855.00
	HK$3.58	HK$3,580.00
完整捲（訂購多個3000）
	HK$3.33	HK$9,990.00
	HK$3.31	HK$19,860.00

† HK$55.00 MouseReel™費用將加入您的購物車內並自動計算。所有MouseReel™訂單均不能取消和不能退換。 ↩

.hidden-for-nojs { display: none; } .pull-right-nojs { justify-content: flex-end; }

商品屬性	屬性值	選擇屬性
製造商:	Texas Instruments
產品類型:	LED照明驅動器IC
RoHS:
輸出數:	1 Output
拓撲學:	Boost
輸出電流:	1.2 A
封裝/外殼:	SC-70-5
電源電壓 - 最大值:	5.5 V
電源電壓 - 最小值:	2.7 V
操作頻率:	1.2 MHz
輸出電壓:	2.7 V to 38 V
系列:	TPS92360
最低工作溫度:	- 40 C
最高工作溫度:	+ 85 C
特徵:	PWM Dimming, Open LED Protection
封裝:	Reel
封裝:	Cut Tape
封裝:	MouseReel
品牌:	Texas Instruments
調光:	PWM
輸入電壓:	2.7 V to 5.5 V
安裝風格:	SMD/SMT
通道數:	1 Channel
產品:	LED Drivers
產品類型:	LED Lighting Drivers
原廠包裝數量:	3000
子類別:	Driver ICs
電源電流 - 最大值:	450 uA
類型:	Inductive

找到產品:

若要顯示類似商品，請選取至少一個核選方塊

至少選中以上一個核取方塊以顯示在此類別中類似的產品。

所選屬性: 0

篩選文檔:

規格書

TPS92360DCKR 規格書

PCN

Product Change Notification 2025-4-11 (PDF)

此功能需要啟用JavaScript。

CNHTS:: 8542399000
CAHTS:: 8542390000
USHTS:: 8542390090
TARIC:: 8542399000
MXHTS:: 8542399999
ECCN:: EAR99

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

TPS92360 LED Backlight Driver

Texas Instruments TPS92360 LED Backlight Driver comes with a 40V rated integrated switch FET and is a boost converter that drives LEDs in series. The boost converter has a 40V, 1.8A internal MOSFET with a minimum 1.2A current limit; thus it can drive single or parallel LED strings for small- to large-size panel backlighting. The default white LED current is set with the external sensor resistor, RSET, and the feedback voltage is regulated to 204mV. During the operation, the LED current can be controlled by using a pulse width modulation (PWM) signal applied to the CTRL pin, through which the duty cycle determines the feedback reference voltage. The TPS92360 does not burst the LED current; therefore, it does not generate audible noises on the output capacitor. For maximum protection, the device features integrated open LED protection that disables the TPS92360 to prevent the output voltage from exceeding the absolute maximum voltage ratings of the device during open LED conditions. The Texas Instruments TPS92360 is available in a space-saving 5-pin SC70 package.