EVAL-LT3964-1-AZ

影像僅供參考
請參閱產品規格

Mouser 編號：

584-EVAL-LT3964-1-AZ

製造商編號：

EVAL-LT3964-1-AZ

製造商：

Analog Devices

說明：

LED 照明開發工具 Eval Board for LT3964-1

規格書:

EVAL-LT3964-1-AZ 規格書 (PDF)

更多資訊

瞭解更多關於Analog Devices EVAL-LT3964-1-AZ的資訊

航運提示：

Mouser目前不在您的地區出售本產品。

供貨情況

庫存：: 發生意外錯誤了。請稍後再試。

.hidden-for-nojs { display: none; } .pull-right-nojs { justify-content: flex-end; }

商品屬性	屬性值	選擇屬性
製造商:	Analog Devices Inc.
產品類型:	LED 照明開發工具
付運限制：	Mouser目前不在您的地區出售本產品。
RoHS:
產品:	Evaluation Boards
用於:	LT3964-1
工作電源電壓:	9 V to 36 V
系列:	LT3964-1
封裝:	Bulk
品牌:	Analog Devices
產品類型:	LED Lighting Development Tools
原廠包裝數量:	1
子類別:	Development Tools

找到產品:

若要顯示類似商品，請選取至少一個核選方塊

至少選中以上一個核取方塊以顯示在此類別中類似的產品。

所選屬性: 0

篩選文檔:

規格書

EVAL-LT3964-1-AZ 規格書 (PDF)

CAHTS:: 8473302000
USHTS:: 8473301180
MXHTS:: 8473300401
ECCN:: EAR99

EVAL-LT3964-1-AZ Evaluation Board

Analog Devices Inc. EVAL-LT3964-1-AZ Evaluation Board is a 36V dual LED driver supporting I²C, featuring the LT3964-1. Analog Devices Inc. EVAL-LT3964-1-AZ operates at a 2MHz switching frequency and drives two 1A LED channels with V_IN between 9V and 36V. The two channels can independently drive LED strings with varying currents, voltages, or dimming ratios. Control options include I2C communication or non-I²C mode with ADDR pin settings. The device protects against open and short LED conditions, reporting faults. In I²C mode, fault settings can be enabled or disabled. Connect up to 8 EVAL-LT3964-1-AZ units with unique addresses on the same I²C bus. Use the DC2026C Linduino® One demo circuit for a serial interface.

31FL323x LED Lighting Development Boards

ISSI 31FL323x LED Lighting Development Boards are development tools that evaluate ISSI multi-channel LED drivers. LED drivers are electrical circuits used to power light-emitting diodes. The fully assembled and tested board is powered by the Arm® Cortex®-M3 or 80C51 (IS31FL3235A-QFLS2-EB) with a 5V operating supply voltage. The evaluation boards have multiple display modes.

IS31LT3360 Demonstration Board

ISSI IS31LT3360 Demonstration Board is a fully assembled and tested PCB that uses the IS31LT3360 continuous mode inductive step-down converter. This ISSI board is designed to drive single or multiple series connected LEDs. This performance is achieved efficiently from a voltage source higher than the LED voltage.