IS32LT3146-ZLA3-TR

Lumissil
870-IS32LT3146ZLA3TR
IS32LT3146-ZLA3-TR

製造商:

說明:
LED照明驅動器IC SIX-CHANNEL LINEAR LED DRIVER WITH SEQUENTIAL TURN ON AND POWER SHUNT

ECAD模型:
下載免費的庫載入器,為ECAD工具轉換此文件。瞭解更多關於 ECAD 型號的資訊。

庫存量: 2,470

庫存:
2,470 可立即送貨
工廠前置作業時間:
26 週 工廠預計生產時間數量大於所顯示的數量。
數量超過2470會受到最小訂單要求的限制。
最少: 1   多個: 1
單價:
HK$-.--
總價:
HK$-.--
估計關稅:

Pricing (HKD)

數量 單價
總價
HK$14.96 HK$14.96
HK$11.01 HK$110.10
HK$10.03 HK$250.75
HK$8.96 HK$896.00
HK$8.47 HK$2,117.50
HK$8.08 HK$4,040.00
HK$7.82 HK$7,820.00
完整捲(訂購多個2500)
HK$7.55 HK$18,875.00
HK$7.37 HK$36,850.00

商品屬性 屬性值 選擇屬性
Lumissil
產品類型: LED照明驅動器IC
6 Output
75 mA
eTSSOP-20
40 V
5 V
- 40 C
+ 150 C
Reel
Cut Tape
品牌: Lumissil
輸入電壓: 5 V to 40 V
濕度敏感: Yes
安裝風格: SMD/SMT
通道數: 6 Channel
產品: LED Drivers
產品類型: LED Lighting Drivers
原廠包裝數量: 2500
子類別: Driver ICs
電源電流 - 最大值: 7 mA
找到產品:
若要顯示類似商品,請選取至少一個核選方塊
至少選中以上一個核取方塊以顯示在此類別中類似的產品。
所選屬性: 0

CAHTS:
8542390000
USHTS:
8542390090
TARIC:
8542399000
MXHTS:
8542399999
ECCN:
EAR99

IS32LT3146 Six-Channel Linear LED Driver

Lumissil IS32LT3146 Six-Channel Linear LED Driver is designed with a power resistor to shunt the power dissipation to optimize the thermal stress on the device. This LED driver offers sequential turn-on and traditional blink modes for turn signal light applications. A logic level at the SEQEN pin switches between these two modes. The channel-to-channel internal delay and startup delay times of the sequential turn-on are fully programmable using external resistors, and no microcontroller is required. The sequential turn-on mode can implement multiple device synchronization operations to realize more than six LED strings sequential turn-on.

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.