TPS92629QDGNRQ1

Name: Texas Instruments TPS92629QDGNRQ1
Brand: Texas Instruments
SKU: 595-TPS92629QDGNRQ1
Price: 19.23 HKD
Availability: InStock

影像僅供參考
請參閱產品規格

Mouser 編號：

595-TPS92629QDGNRQ1

製造商編號：

TPS92629QDGNRQ1

製造商：

Texas Instruments

說明：

LED照明驅動器IC Automotive single-c hannel high-current

規格書:

TPS92629QDGNRQ1 規格書

ECAD模型:

下載免費的庫載入器，為ECAD工具轉換此文件。瞭解更多關於 ECAD 型號的資訊。

更多資訊

瞭解更多關於Texas Instruments TPS92629QDGNRQ1的資訊

庫存量: 2,014

庫存：: 2,014 可立即送貨

發生意外錯誤了。請稍後再試。
工廠前置作業時間：: 6 週工廠預計生產時間數量大於所顯示的數量。

輸入數量：

最少： 1 多個： 1

單價:

HK$-.--

總價:

HK$-.--

估計關稅:

包裝:

完整捲（訂購多個2500）

帶狀裁切

MouseReel™ (+HK$55.00)

Pricing (HKD)

數量	單價	總價
零卷 / MouseReel™ ^†
	HK$19.23	HK$19.23
	HK$14.22	HK$142.20
	HK$12.91	HK$322.75
	HK$11.59	HK$1,159.00
	HK$10.93	HK$2,732.50
	HK$10.52	HK$5,260.00
	HK$10.19	HK$10,190.00
完整捲（訂購多個2500）
	HK$9.86	HK$24,650.00
	HK$9.62	HK$48,100.00

† HK$55.00 MouseReel™費用將加入您的購物車內並自動計算。所有MouseReel™訂單均不能取消和不能退換。 ↩

.hidden-for-nojs { display: none; } .pull-right-nojs { justify-content: flex-end; }

商品屬性	屬性值	選擇屬性
製造商:	Texas Instruments
產品類型:	LED照明驅動器IC
RoHS:
輸出數:	3 Output
輸出電流:	250 mA
電源電壓 - 最大值:	45 V
電源電壓 - 最小值:	4.5 V
輸出電壓:	4.2 V to 4.8 V
系列:	TPS92629
最低工作溫度:	- 40 C
最高工作溫度:	+ 125 C
封裝:	Reel
封裝:	Cut Tape
封裝:	MouseReel
品牌:	Texas Instruments
開發套件:	TPS92629Q1EVM
調光:	Analog
輸入電壓:	4.5 V to 45 V
濕度敏感:	Yes
安裝風格:	SMD/SMT
通道數:	1 Channel
產品:	LED Drivers
產品類型:	LED Lighting Drivers
原廠包裝數量:	2500
子類別:	Driver ICs
類型:	Automotive High Side LED Driver

找到產品:

若要顯示類似商品，請選取至少一個核選方塊

至少選中以上一個核取方塊以顯示在此類別中類似的產品。

所選屬性: 0

篩選文檔:

規格書

TPS92629QDGNRQ1 規格書

此功能需要啟用JavaScript。

CAHTS:: 8542390000
USHTS:: 8542390090
TARIC:: 8542399000
MXHTS:: 8542399999
ECCN:: EAR99

TPS92629-Q1 40V Single-Channel LED Driver

Texas Instruments TPS92629-Q1 40V Single-Channel LED Driver includes a unique thermal management design to reduce temperature rising on the device. The TPS92629-Q1 is a linear driver directly powered by automotive batteries with large voltage variations to output full current loads up to 250mA. External shunt resistors are leveraged to share output current and dissipate power out of the driver. The device’s full-diagnostic capabilities include LED open, LED short-to-GND, LED short-to-battery circuit, and device overtemperature protection. The high accuracy optimized slew rate of analog dimming control support off-board long-wire driving with enhanced EMC performance. The Texas Instruments TPS92629-Q1 also eliminates flick and after-image issues. Different voltage levels could report multiple faults through fault pins for safety-critical applications.

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.