MP5056GQV-P

Monolithic Power Systems (MPS)
946-MP5056GQV-P
MP5056GQV-P

製造商:

說明:
熱插拔電壓控制器 28V, 15A adjustable current limit, 7mohm RDS(ON), +/-10% current monitor accuracy, Hot-Swap Protection Device with Current Monitoring,

壽命週期:
Mouser新產品
ECAD模型:
下載免費的庫載入器,為ECAD工具轉換此文件。瞭解更多關於 ECAD 型號的資訊。

供貨情況

庫存:
暫無庫存
工廠前置作業時間:
最少: 1   多個: 1
單價:
HK$-.--
總價:
HK$-.--
估計關稅:

Pricing (HKD)

數量 單價
總價
HK$29.43 HK$29.43
HK$19.40 HK$194.00
HK$17.92 HK$448.00
HK$15.62 HK$1,562.00
HK$14.80 HK$3,700.00
完整捲(訂購多個500)
HK$12.49 HK$6,245.00
HK$10.52 HK$10,520.00
HK$9.95 HK$24,875.00
HK$9.78 HK$48,900.00

備用包裝

製造商 元件編號:
包裝:
Reel, Cut Tape
供貨情況:
庫存量
價格:
HK$25.15
最小值:
1

商品屬性 屬性值 選擇屬性
Monolithic Power Systems (MPS)
產品類型: 熱插拔電壓控制器
RoHS:  
Hot Swap Protection Devices
5 A to 15 A
28 V
6 V
8 Channel
1 mA
- 40 C
+ 125 C
SMD/SMT
QFN-22
Reel
Cut Tape
No
品牌: Monolithic Power Systems (MPS)
輸入/電源電壓 - 最大值: 28 V
輸入/電源電壓 - 最小值: 6 V
Pd - 功率消耗 : 215 W
產品類型: Hot Swap Voltage Controllers
系列: MP5056
原廠包裝數量: 500
子類別: PMIC - Power Management ICs
找到產品:
若要顯示類似商品,請選取至少一個核選方塊
至少選中以上一個核取方塊以顯示在此類別中類似的產品。
所選屬性: 0

MP5056 Hot Swap Voltage Controllers

Monolithic Power Systems (MPS) MP5056 Hot Swap Voltage Controllers are designed to protect circuitry on its output from transients on its input. These controllers' maximum output load is current-limited using a sense FET topology. The MP5056 voltage controllers include an IMON option that produces a voltage proportional to the current flowing through the power device. These voltage controllers protection features include current-limit protection, thermal shutdown, damaged MOSFET detection, and Under-Voltage Lockout protection (UVLO). The MP5056 controllers' total short-circuit response time is about 200ns. These controllers are available in a QFN-22 (3mm x 5mm) package. The MP5056 devices are ideal for voltage controllers and are suitable for applications such as hot swaps, home appliances, PC cards, and storage devices.

LM5060 High-Side Protection Controllers

Texas Instruments LM5060 High-Side Protection Controllers with Low Quiescent Current offers intelligent control of a high-side N-channel MOSFET during normal on/off transitions and fault conditions. The constant rise time of the output voltage results from the inrush current control. Both an Input UVLO (with hysteresis) and a programmable input OVP are provided, with an enable input offering a remote on or off control. The initial start-up VGS fault detection delay time, the transition VDS fault detection delay time, and the continuous over-current VDS fault detection delay time is programmed from a single capacitor. The MOSFET is latched off until either the enable input, or the UVLO input is toggled low and then high when a detected fault condition persists longer than the allowed fault delay time.