Bourns TISP40xxH1BJ VLV Overvoltage Protectors
Bourns TISP40xxH1BJ Very Low Voltage (VLV) Overvoltage Protectors are designed to control overvoltages on digital telecommunication lines and consist of a symmetrical voltage-triggered bidirectional thyristor. Overvoltages are initially stopped by breakdown clamping until the voltage rises to the breakover level, which triggers the device to crowbar into a low-voltage on-state condition. This low-voltage on-state allows the current resulting from the overvoltage to be safely diverted through the device. The device switches off when the diverted current drops below the holding current value.
Features
- Low capacitance
- Controls overvoltages on digital telecommunication lines
- ±5μA repetitive peak off-state current (IDRM)
- ±0.8A maximum breakover current (I(BO))
- ±50mA minimum holding current (HI)
- Package: SMB (DO-214AA)
- Temperature ranges
- -40°C to +150°C junction range (TJ)
- -65°C to +150°C storage range (Tstg)
Applications
- Digital Line Signal Level Protection
- ISDN
- xDSL
Related Overvoltage Protectors
Bourns TISP4xxxM3BJ Overvoltage Protectors
Current protection devices designed to limit overvoltages on telephone lines.
View All
Bourns TISP Thyristor Overvoltage Protectors
Specially designed to protect telecom equipment from high voltages caused by lightning strikes.
View Results ( 5 ) Page
| 零件編號 | 規格書 | 轉折電壓VBO | 最大轉折電流IBO | 重複關斷狀態的額定電壓VDRM | 關斷狀態泄露電流@ VDRM IDRM | 保持電流 Ih 最大 | 额定电流 |
|---|---|---|---|---|---|---|---|
| TISP4025H1BJR-S |  |
25 V | 800 mA | 13 V | 5 uA | 50 mA | 5 A |
| TISP4030H1BJR-S | |
30 V | 800 mA | 15 V | 5 uA | 50 mA | 5 A |
| TISP4015H1BJR-S | |
15 V | 800 mA | 8 V | 5 uA | 50 mA | 5 A |
| TISP4040H1BJR-S | |
40 V | 800 mA | 25 V | 5 uA | 50 mA | 5 A |
| TISP4011H1BJR-S | |
9 V | 200 mA | 5.25 V | 1 uA | 60 mA | 5 A |
發佈日期: 2016-01-21
| 更新日期: 2022-03-11